TYPE S Smart LED Hood & Motorcycle Lighting Kit
Add some character to your ride with the Smart LED Under Hood & Motorcycle LED Lighting Kit from TYPE S, featuring 8 multicolor LED light strips and a smart hub controller for a custom lighting experience using the TYPE S LED app.
Easily control the TYPE S Smart LED 24" Light Bar with the TYPE S LED app, including 49 unique colors to choose from, adjustable brightness, multiple light modes, and more.
Design your own custom lighting zones under the hood or around your motorcycle to create the perfect blend of colors and brightness.
Made of flexible rubber tubing, TYPE S LED strips are easy to install and comes backed with 3M VHB adhesive tape for secure mounting.
Add some character to your ride with the Smart LED Under Hood & Motorcycle LED Lighting Kit from TYPE S, featuring 8 multicolor LED light strips and a smart hub controller for a custom lighting experience using the TYPE S LED app.
Easily control the TYPE S Smart LED 24" Light Bar with the TYPE S LED app, including 49 unique colors to choose from, adjustable brightness, multiple light modes, and more.
Design your own custom lighting zones under the hood or around your motorcycle to create the perfect blend of colors and brightness.
Made of flexible rubber tubing, TYPE S LED strips are easy to install and comes backed with 3M VHB adhesive tape for secure mounting.
FAQ
What's the maximum number of this kit can be controlled by TYPE S LED app?
Up to 4 ( It'd control all nearby devices at the same time. )
How many color does this kit have?
49 colors.
Can I cut the LED strips?
No, we don't recommend to cut the LED strip/cable. When you cut the strip/cable, this product will no longer be protected from water or dust. The electrical circuit may short at any condition and that will broke your car electrical system.
Can this kit be used on the exterior of the car, is it waterproof?
Yes, this kit is intended for exterior use.
LED strips are IP65 rated.
What type of LED do I use?
5050 SMD RGB - Surface mounted diode.
Can more than one Hub Controller be used at once?
Up to 4 Smart Hub Controllers can be used at the same time. Each hub will represent a specific "zone."
Is this kit expandable?
Yes, there are Plug & Glow Extensions available.
Can my phone connect to this kit?
Type S LED APP is compatible:
iOS:
with iPhone 4s & higher, iPad3, iPad Mini, iPad Air & higher, and iPod touch 5th Generation & higher. Requires iOS 9.0 or higher
Android:
with phones with AndroidTM 4.3 or higher.
Note: not all AndroidTM phones are equipped with Bluetooth® v4.2 required for this application.
How to control this kit through my phone?
Please download 'Type S LED' from Apple Store and Google Play.
Why the light turns off after 10 seconds?
Car battery may be undercharged or low. Do not turn on the LED lights.
Recharge or replace car battery.
Why the light turns off after 30 minutes?
Light may still be “on” after engine is turned off. Lights will automatically turn off and Hub will be in standby mode when the voltage drops to approximately 12V. Start the engine and the vehicle will generate voltage above 12V.
Why the light is not working?
It can be Poor power connection, please check power connection and make sure the Smart Hub LED is flashing or try to disconnect power and reconnect.
Or incorrect password on APP, Press and hold Smart Hub reset button for 3 seconds to reset password
The APP password is not working?
Password Function only available with Off-Road, Exterior Kit and Pro Series LED Kit
You can set up a password to prevent other devices from controlling your lights. Once you have entered your password, it will be saved in the APP and Smart Hub Controller.
To set or change the password, your device must be connected to Smart Hub and simply follow on-screen instructions.
Changing the password without connecting to the Smart Hub may cause an invalid password the next time your App and Smart Hub are activated.
If you forget your password, simply reset by pressing the Smart Hub Controller reset button for 3 seconds or disconnect the power from the car battery.
My LED kit can't connect to my phone.
Make sure the bluetooth function is turned off in your mobile device.
Pressing the Smart Hub Controller reset button for 3 seconds or disconnect the power from the car battery to make sure the Smart Hub enter pairing mode.
Follow on-screen instructions to set the password.
Avoid changing the password without connecting to the Smart Hub may cause an invalid password the next time your App and Smart Hub are activated.
Product specification
The TYPE S Smart Motorcycle / Engine Bay LED Kit, built with heat resistant material, allows you to showcase premium lighting within an engine bay or on a motorcycle. Select colors, modes and settings with the TYPE S LED App. Supplemental motorcycle brake and signal indicator lights are included.
12 VDC System Only
1A
LM57363-48/6 (UPC 643334573637)
LM557363-1 (UPC 643334573637)
In the Box
- Smart Motorcycle LED Light Kit with Turn Signal / Brake Light Bars or optional use Smart Engine Bay Kit with 8 LED Light Bars
- 3M™ VHB Double-sided Tape for Smart Hub Controller
- Alcohol Wipe